Technical Data Sheet AERO-THERM

  • SAFETY DATA:  9th April 2010
  • Last update:   18th April 2011

Product Description

AERO-THERM insulation combines modern thermal insulators to achieve maximum thermal insulation properties in an extremely thin layer. It brings new solutions to building and construction insulation problems.

  • Material Parameters/Form material: Water-based sealant
  • Function: Thermal reflexion, thermal insulation
  • Composition:       Filler 3M aerogel, dispersions, additives
  • Insulators: 3M glass microspheres containing partial vacuum, aerogel
  • Application thickness: 0.8 to 1.0 mm
  • Coefficient of thermal conductivity λ: 0.047 W/mK     ČSN EN 12667 : 2001
  • Heat resistance after application: -40°C to +150°C without loss advised
  • Adhesion to substrate: 0.8 MPa         ČSN EN 1542
  • Water vapour permeability: 117.21 g/m2d     ČSN EN ISO 7783-2
  • Diffusion equivalent thickness:           0,19 m         ČSN EN ISO 7783-2
  • Classification of permeability to water vapour: Class V2–medium ČSN EN     ISO 7783-2
  • Load construction: 0.3 kg/m2
  • Sensory evaluation of odour: Grade 0 ČSN EN 1230-1
  • Reaction to fire, smoke, burning dripping drops: A2 – s1, d0 ČSN EN 13501-1: 2007
  • Index of flame propagation along the surface of the material: 0 mm/min ČSN 73 0863
  • Radionuclide tests: Compliance with established values
  • Decree 307/2002 Coll. as č.499/2005 Coll. § 96 Appendix No.10
  • Minimum lifetime: 15 years provided methods of application are followed

2 | Technical Data Sheet AERO-THERM

Physical features and benefits:

High thermal insulation efficiency in a fraction of the thickness of other thermal insulation materials.

Long life, minimal maintenance, easy reparability, surface structures are protected from moisture condensation.

Easy and fast application, zero waste, high efficiency work in the application of thermal insulation by spraying, applications directly to the surface without need for scaffolding.

Non-flammable, environmentally-friendly and hygienic. Application and drying will not release any chemical substances and odour material.

AERO-THERM can be applied to any shape and material. Low cost, long life, minimal maintenance, easily repaired.

Areas of application: Private dwellings, public buildings, business premises, industrial plants, process equipment, passenger and freight vehicles, and more.

Housing:

New buildings and renovations. Thermal insulation of walls, ceilings, floors, insulation in conjunction with underfloor heating, humid walls that freeze during winter, removal of the causes of mould, attic insulation and removal of heat in the summer months.

Public buildings:

Office buildings, shopping centers, cultural and congress buildings, hotel and restaurant equipment, schools, hospitals and nursing homes, spas, sports halls, etc. Improving air quality indoors.

Business premises and industrial buildings:

Reducing energy consumption of buildings and production halls, improve working conditions. Reducing energy consumption and increasing the efficiency of technological equipment, safety at work.

Technological equipment:

The product can be applied without the use of scaffolding, highly efficient in a thin layer maximising available space. Thermal insulation efficiency: from -40˚C to +150˚C. Can be applied directly on the surface of the equipment.

Passenger and freight transport:

Thermal insulation of the interiors of vehicles, buses including frosty bus floors, railway vehicles, reduces energy consumption and increases efficiency in air conditioning, heating and freezing appliances, preventing the transmission of heat from the engine into the vehicle’s interior.

Removal and prevention of mould. Reduction of thermal bridges, removal of condensation from humidity on cold walls in rooms with increased humidity.

Application of AERO-THERMO eliminates the conditions in which fungi occur.

Places where you cannot apply AERO-THERM:

On walls with rising salty humidity it will not be possible to guarantee the efficiency and life of AERO-THERM. Salty water can make AERO-THERM fall from walls.

AERO-THERM and water:

In places where there is direct contact with water, it is necessary to protect the thermal insulation. E.g. hot water, it is necessary to protect AERO-THERM with a polymer-based waterproof coat such as Multigum from the company Bitum UK Ltd. The product is referred to as Multigum in the Spaniel SYSTEM.